Your new command center for Eurorack output and monitoring, featuring:
Stereo Output OR Dual Mono Mixer functionality.
Dedicated Cue Input lets you preview signals discreetly – perfect for performance.
Flexible Headphone Out with switchable source (Pre-Level, Master, Cue).
Fully balanced output (optional on rear panel)
Get precise control over what goes out and what you hear. The OUTMIX is designed to be the clear, essential final stage for your patches.
Depth: 25mm
Power: 39mA +12v; 27mA -12v
+ 15cm power cable included
Size: 4HP
WILDSYNC ADSR 4001
The WILDSYNC ADSR 4001 is a versatile ADSR/AD envelope generator.
It features both ADSR and AD modes, allowing for flexible envelope shaping.
In AD mode, it offers a looping function, controlled by gate logic, to create evolving, rhythmic patterns.
The module provides three timing ranges (short, medium, long) to accommodate a wide variety of musical applications, from snappy percussive hits to slow, evolving pads.
A manual gate button allows for hands-on experimentation and real-time control.
The retrigger input ensures precise control over the envelope cycles, ideal for complex rhythmic sequences.
The module outputs both normal and inverted envelope signals, offering even more creative possibilities in sound design.
ADSR Envelope Generator
- ADSR or AD mode
- LOOP in AD mode (which GATE logic control)
- Three timing ranges S/M/L
- Manual GATE button
- Retrigger input
- Normal and Inverted outputs
Depth: 30 mm deep
Current Draw
55 mA +12V
45 mA -12V
Size: 6 HP
The Wildsync VP-1 is a versatile signal processing module for modular synthesizer systems. It offers three independent channels for attenuating, inverting, amplifying, and mixing signals. Each channel can handle both external signals and internal reference voltages, making it a powerful tool for modulation and control in any system. The module features bipolar LEDs to visualize the polarity and level of the output signal on each channel.
Key Features:
- Three independent channels for signal level control.
- Mode selection: attenuator (>) or attenuverter (><).
- Gain switch with three levels: 0.5X, 1X, and 2X.
- Internal reference voltage (2.5V, 5V, or 10V) when no input is connected.
- Bipolar LEDs for visualizing polarity and output signal level.
- Signal mixing when outputs are not in use.
- Each channel can be used as an Offset Voltage source.
The Wildsync VP-1 is the perfect solution for flexible control and mixing of modulation and audio signals in your modular system!
Depth: 25mm
Power: 38mA +12v; 33mA -12v
+ 15cm power cable included
Size: 4HP
The Wildsync FATMOOG VCF/VCA module is a powerful addition to your Eurorack system, combining the legendary sound of the Moog ladder filter with an integrated VCA. This module can become the heart of your synthesizer, imparting a distinctive analog character typical of classic Moog synthesizers.
The module features a voltage-controlled 24 dB/octave ladder filter, enriching your sound with harmonics and providing the signature "fat" tone that Moog filters are known for. The addition of the VCA makes this module a compact and efficient output stage for your synthesis setup, allowing for dynamic control of your audio signals.
With this module, you can create a wide range of sounds: pair it with a VCO, mixer, and envelope generator to craft a complete bassline synthesizer, or crank up the resonance and add an envelope for punchy bass drums and toms.
Features:
- Voltage controlled 24 db/octave ladder filter
- Attenuverter on filter CV input
- Level attenuator on VCA CV input
- 2 waveshaper mods: Lead (prodigy) and Bass (minitaur)
- Output peak indicator with adjustable peak level setting
- VCA range from 0 to 8V
Depth: 30 mm
Current Draw:
32 mA +12V
27 mA -12V
Size: 8 HP
MIX6.2 is a 6 channel signal mixer. It has 6 inputs and 2 outputs with 10Vpp (eurorack level) peak indicator.
123 output is mixed into the 456 output if nothing is inserted in the 123 out jack. It can work like 2x3 channel mixer or one 6 channel mixer.
By default, the MIX6.2 is designed to mix audio signals, but it can be modified to mix CV signals instead.
There are 8 solder jumpers on the back side which can be connected, to turn the MIX6.2 into a CV mixer.
MIX6.2 has a gain level of 1X, but you can increase it to level 2X or 4X with solder jumpers.
Current Draw: 10 mA +12V, 10 mA -12V
Size: 4HP, 23 mm deep
Low, Mid, and High equalization with an exceptionally wide range of adjustment: -26dB- +12dB. With this adjustment range, you can use it as a "Kill Switch", widening the scope for creativity.
Low Frequency
-20 ~ +12 dB @ 100Hz
Mid-frequency
-20 ~ +12 dB @ 1kHz
high Frequency
-20 ~ +12 dB @ 10kHz
With a high gain level, you have input access for either other Eurorack modules, synths, or a CD, players, laptop, etc. In stereo or mono format.
Size: 24HP
Low, Mid and High equalization with an exceptionally wide range of adjustment: -26dB- +12dB. With this adjustment range you can use it as a "Kill Switch", widening the scope for creativity.
Low Frequency
-20 ~ +12 dB @ 100Hz
Mid frequency
-20 ~ +12 dB @ 1kHz
high Frequency
-20 ~ +12 dB @ 10kHz
With a high gain level, you have input access for either other eurorack modules, synths or a CD, players, laptop etc. In stereo or mono format.
Size: 6HP
MIX6 is a 6 channel signal mixer. It has 6 inputs and two outputs. 123 output is mixed into the 456 output if nothing is inserted in the 123 out jack. It can work like 2x3 channel mixer or one 6 channel mixer.
By default, the MIX6 is designed to mix audio signals, but it can be modified to mix CV signals instead
There are 8 solder jumpers on the back side which can be connected, to turn the MIX6 into a CV mixer.
MIX6 has a gain level of 1X, but you can increase it to level 2X on channels 123 or 456 with solder jumpers.
Size: 4HP
Each color occupies a different area of the frequency spectrum and can be used for different effects:
White noise is flat across the whole audio spectrum and is good for snares, the classic techno noise sweeps, and for sculpting windy types of sounds.
Blue is high-pitched and is good for synthesizing hi-hats.
Pink noise has the same amount of energy in every octave and is often used as a reference signal.
Brown is a low-frequency Brownian motion. When paired with a Sample and Hold module, this can give a good random walk bassline.
Size: 6HP
WILDSYNC Noise - 4 different colors of noise: Blue, Pink, White, Red.
Each color occupies a different area of the frequency spectrum and can be used for different effects:
White noise is flat across the whole audio spectrum and is good for snares, the classic techno noise sweeps, and for sculpting windy types of sounds.
Blue is high-pitched and is good for synthesizing hi-hats.
Pink noise has the same amount of energy in every octave and is often used as a reference signal.
Brown is a low-frequency Brownian motion. When paired with a Sample and Hold module, this can give a good random walk bassline.
Size: 3HP
Wildsync FATMOOG VCF
Voltage controlled 24 db/octave
2 waveshaper mods: Lead (prodigy) and Bass (minitaur)
Size: 8HP
Envelope follower, amp, gate and trigger generator.
Size: 6HP
Noise2 is a compact yet powerful Eurorack module that combines a noise generator, a sample & hold circuit, and a clock generator, all within a 3HP format.
Noise Generator: Features a filter control knob (NFILT) and two outputs for WHITE noise and filtered NFILT noise.
Sample & Hold: Includes an input (SHIN) with 3x gain, internally routed to noise by default (selectable between white noise and filtered noise via jumper), an input attenuator (AT), a mode switch (Sample & Hold / Track & Hold), an output indicator, and an output jack (SHOUT).
Clock Generator: Features an input (CIN) that can accept TRIG or CV 0..8V signals (selected via an onboard switch), a time control knob (CLOCK) with two timing ranges (40ms to 3s or 77us to 7ms, switchable via an onboard switch), an output trigger indicator, and a clock output (COUT).
Noise2 is an excellent tool for rhythmic sequencing, modulation, and adding organic randomness to your patches.
Dimensions: 3 HP, 35 mm deep
Current Draw: 29mA +12V, 11mA -12V
+ 15cm power cable included
Size: 3HP