Hack Modular products
A 10HP Eurorack panel inspired by the display of the Apollo Guidance Computer that took the man to the moon.
The DSKY panel is backlit, replicating the beautiful electroluminescent glow of the original displays. This is done with three LED boards that plug directly into your Eurorack power bus - included fully assembled with each panel. Each LED can be aimed to achieve even lighting of the panel.
Packaging is 100% recyclable.
Size: 10 HP
This 40HP Eurorack module transforms control voltages into Telegraph code (ITA2) - displayed by illuminated characters on the panel. Each character is assigned to a semitone when calibrated to 1V/oct.
Like a genuine teletypewriter the Lamp Board uses electromechanical components. LETTER & FIGURE shift indicators are latched by a clicking relay and a solenoid sounds the BELL, mounted on the rear of the module.
Part of a series of Eurorack modules exploring early computing and telecommunications - including it's sister module the Enigma Lamp Board and these fun Telegraph code panels.
Much more information can be found in the User Guide.
Included are four M3 panel screws, a ribbon cable and screwdriver for calibration.
See the step-by-step calibration tutorial here.
All packaging is recyclable.
Size: 40 HP
Super handy through-hole gauge and ruler for drafting and designing.
As Mitch from Hack Modular says, this is a crucial tool for me, I wish I had made it sooner! A lot of his designs require exact tolerances and answers to unusual questions. Guessing these, even with calipers, can lead to expensive and time consuming mistakes. Never trust datasheets!
Constantly useful for visualising ideas and as a template for panel layouts in your notebook.
Numbers are oppositely orientated on either side so that you can measure a line from above or below without having to read upside down.
Plus it's a Eurorack panel!
Other PCB design tools:
* PCB Slot Gauge
* PCB Thickness Gauge Set
100% recyclable packaging.
Reversible 4HP Eurorack Blank Panel.
HACK logo on one side.
Screw surround to prevent rack rash, small enough to be covered by Knurlies. For M3 mounting screws.
Made with PCB materials.
Standard Doepfer Eurorack specification dimensions. 1.6mm thick, 20.32mm wide, 128.5mm high.
Logo oriented centrally, will line up in oppositely oriented pair.
100% recyclable packaging.
Size: 4hp
This module is a performance focused take on the classic CEM3340 Curtis chip based oscillators heard in historic synthesizers like the Prophet 5 and Memorymoog.
The most useful features of the chip are made accessible and optimised for sending or receiving control. Panel controls are intended to allow quick and unobstructed access to musical ideas.
Some distinguishing features include:
* 4 position rotary octave switch
* low frequency oscillator mode (from around 8 seconds per cycle to audio rate)
* linear octave up and down detented frequency pot
* external pulse width modulation
* matched amplitude outputs
* panel accessible master tune trim
* two 1V/Oct CV inputs.
For more details see the User Guide.
100% recyclable packaging.
Size: 4hp
A voltage-controlled character display. Fully built.
Based on the illuminated lamp board of the Enigma cipher machine. Part of a series of Eurorack modules exploring early computing and telecommunications.
The module encodes control voltages in an alphabetical or International Telegraph Alphabet 2 (ITA2) sequence. Each character is assigned to a semitone when calibrated to 1V/oct.
Much more information can be found in the User Guide.
Also included with the kit and assembled module are four M3 panel screws, a ribbon cable, screwdriver for calibration and one metallic Enigma Badge.
Please be aware the wooden case is NOT included.
Size: 40HP
This Eurorack format relay based module is a simple bi-directional, single pole, double throw, momentary switch. The three switch terminals are wired to jack sockets on the panel. The switch can be actuated by the panel push button or externally controlled.
The relay is plugged in to a socket through the panel, so can be easily swapped out. Many relays are compatible with the module, each with it's own sonic character and switching characteristics. All these relays are capable of switching at audio rate frequencies. The relay is backlit with a real miniature bulb.
100% recyclable packaging.
Size: 4hp
This reversible 4HP Eurorack Blank Panel is your handy key to reading International Telegraph Alphabet (ITA2).
Each side has paper tape code, letter and figure shift columns. One side is arranged in alphabetical order, the other in ascending binary.
Screw surround prevents rack rash, small enough to be covered by Knurlies. For M3 mounting screws.
Standard Doepfer Eurorack specification dimensions. 1.6mm thick, 20.32mm wide, 128.5mm high. Made with PCB materials.
Made to accompany upcoming Hack modules inspired by early computers and telecommunications. Based on the British ITA2 variant.
100% recyclable packaging.
Size: 4 HP