This set includes four blank panels of four different sizes: 2HP, 4HP, 6HP, and 8HP.
This is a set of four blank panels with Clatters microchip-shaped logo.
Make your empty spaces shine!
Materials: FR4 black panels with gold finish;
This module is available in black color.
Sibilla is a DSP digital stereo oscillator that aims to translate into music the beauty and harshness of a semi-barren mountain. Its sound is sculpted by various saw and sine waves running through intricate delay networks, altered by LFOs, white noises, and creating constructive and destructive interferences.
Both stereo channels are the output stages of two feedback audio loops.
Each loop is made up by a main sub-sinusoidal wave oscillator and two saw and sine waves with frequencies affected by the generation of harmonics (right channel) and subharmonics (left channel). All waves have different phases whose offset is constantly affected by minor variations created by two pairs of grains randomly fluctuating within the waves amplitude spectrum and being sampled at a certain speed.
Waves then meet to each other to a common point, together with two white noise sources, creating constructive and destructive interferences constantly affected by two LFO’s movements.
Interferences are then run into a resonant low pass filter and then distributed to four different delay lines from which they are fed back into the audio loops at different time intervals depending on the grains movements.
Manual: https://clattersmachines.com/wp-content/uploads/2023/03/Sibilla_manual.pdf
Size: 10HP
The Garden Listener is a random control messages generator from biometric signals. It detects conductivity variations on living beings’ surfaces and transforms them into MIDI notes, ranging from C-1 to C8, and CV signals (0 – 5V). Its behavior can be tamed through the one-knob menu from which you can choose and modify:
probes’ sensitivity (making it more or less sensitive to current variations);
scale (chromatic, major, minor, indian and arabic);
MIDI channel (from 1 up to 16);
LEDs’ brightness.
Conductivity variations are detected by the Probes Input and converted into MIDI notes in real-time according to the Main menu settings. Each MIDI note exits through the MIDI output, allowing you to take advantage of the sound of either any synthesizer equipped with a MIDI port or any VST in your DAW and gets converted into an analog signal.
Trigger and Gate are fired every time a new note is generated, their voltage output can be modified with the respective attenuator (0 – 5V).
All the MIDI notes are converted into variable voltages (0 – 5V) depending on their pitch and exit through the CV output (1V/oct).
The CV output behavior can be modified via the Octave Selector which acts as a “CV equalizer” from which you can choose to generate a CV only if the respective MIDI note lies within a certain octave range.
For once, leave those LFOs alone, and let any living conductive being modulate your signals.
The module comes with 3.5mm white probes and a set of snap-on adhesive reusable electrode pads. A MIDI-TRS type A adapter (not included) is required for the MIDI output.
The module requires calibration for a proper 1V/oct output.
8HP, 22.6mm deep
Current draw:
+12V: 24mA
-12V: 20mA
+5V: 0mA;
User’s Manual: https://clattersmachines.com/wp-content/uploads/2021/08/GL-V.1.0.pdf
Instructions Manual: https://clattersmachines.com/wp-content/uploads/2022/02/Instruction-Manual_Garden-Listener.pdf
This set includes four blank panels of four different sizes: 2HP, 4HP, 6HP, and 8HP.
This is a set of four blank panels with various Clatters designs;
Make your empty spaces shine!
Materials: FR4 black panels with gold finish;